Local Internet Development
The service structure shall be performed in the configuration as follows:
- Start the configuration (see paragraph. of the configuration) and on the input, the Action Choice select the operating mode of the Traffic Inspector.
Comment! At the first start of the configuration, the action selection shall not be displayed and the configuration itself will automatically operate in configuration mode. Services will be available only after the setting of the operating mode (see para.). Restructuring of the regime of work.
- On the Opation ' s Flag Configuration, turn on or turn off the following possibilities and services Traffic Inspector:
- External traffic screen Inspector Traffic is a separate service using the filtering of the inlet traffic on the external interface to protect server and local network (for further details see the outer web screen.)
- Conditional Marshrutization - Advanced Routing is a function of simultaneous use of several Internet connections. Provides direction of different traffic to different external interfaces (see Advanced Routing for details - work with several external interfaces).
Comment! This function makes sense if there are several Internet connections on the Traffic Inspector server, i.e. several external web interfaces.
- RAS server - use of Windows RAS server to connect clients through VPN and various modes.
- "Public" internal networks are connected if there's a "not trusted" in the field network traffic server. When this flash drive is activated, it is possible to issue separate rules and internal web screens for public and local ( " certified " ) networks.
- VLAN support (IEEE 802.1Q) - support for virtual Ethernet networks at Driver Traffic Inspector level.
- DVB map - when this flash drive is activated, it becomes possible to develop data reception and transmission from different external web interfaces (usually used when the track is obtained through the satellite and its shipment through the ground or mobile transmission).
- In the Service ' s contribution, indicate TCP-port where HTTP-prox Traffic will operate (the default Inspector 8080 is used), which includes support for HTTP, HTTPS, FTP (through HTTP/GET).
Comment! The HTTP-proxy service cannot be completely shut off. If necessary, users can be restricted by regulations.
